Products

G2G-Care is an efficient and highly effective indoor coil cleaner combined with a powerful BS/EN approved disinfectant.  Effectively kills MRSA, Legionella and many other germs (see download section for copies of laboratory test reports).

Features:

• Indoor coil cleaner and BS/EN approved disinfectant
• Eliminates slime and contamination
• Protects the coil for up to 6 months
• BS/EN 1276 approved as a bacticide
• BS/EN 1650 approved as a fungicide

G2G Bubble is a spray on leak detector.  It’s high bubbling viscosity makes finding refrigerant leaks fast and easy and it leaves behind minimal residue.  It can be cleaned off with a damp cloth.

Features:

• High bubbling leak detector
• Excellent viscosity
• Clings to surfaces
• Easy to clean up with water
• Easy to use
• Minimum residue

The RPC channel clip fits around the pipe and insulation. Ideal for multiple pipe runs, the one piece composite (nylon) alloy clamp absorbs shock and vibration. Quick and easy to install and suitable for temperatures -40°C to +140°C.

The InsulClips allows an uninterrupted vapour seal and eliminates the problem of sweating on metal fittings. This makes the InsulClip the ideal product to secure the installation of the refrigerant pipes, allowing the vapour seal to run the length of the pipework without cutting the insulation material. Made from a composite polyamide (nylon) alloy, which has similar tensile strength properties to nylon but better impact strength, especially at low temperatures.

The studding clips from RPC have a unique way of attaching themselves to the threaded rod. Simply insert the clip and snap to secure. The ratchet design locks the pipework in place. It will overcome the problems of using cable ties for piping, electrical, optical and network cabling.

Channel cable tie clips accommodate PVC or metal cable ties up to a width of 17mm. They come in three support base lengths of 50, 65 and 80mm. The channel clips are secured on the channel with a twist lock motion, ready for the cable tie to be inserted to secure the refrigeration pipework. Clips can be used in temperatures ranging from -40 to 140˚C. They have a melting point of 220˚C. They can withstand pressures up to 40 MPa, with less than 4% deformation, and provide high resistance to mechanical stress creep. As well as resisting all know solvents, the clips have a low moisture sensitivity. They also have stable electrical and vibration properties and a high resistance to UV light.

DiversiTech International stock a range of various branded condensate removal tank pumps.

The DiversiTech RedBox 1 Litre Tank Pump is a condensate tank pump with a flow rate of 280 LPH and a lift of 5.1 metres. This pump has metal mounting tabs which allows the tank to be screwed to the wall. The universal power lead makes the pump easy to install, service and retrofit. The unique LED indicators highlight when the pump has power, is running and when the high level alarm has been activated.

The DiversiTech RedBox 2 Litre Tank Pump is a condensate tank pump with a flow rate of 280 LPH and a lift of 5.1 metres. This pump has metal mounting tabs which allows the tank to be screwed to the wall. The universal power lead makes the pump easy to install, service and retrofit. The unique LED indicators highlight when the pump has power, is running and when the high level alarm has been activated.

DiversiTech International stock a range of mini condensate pumps ideal for split air conditioning systems, small enough to be placed in the unit, or within trunking. We also provide mini pump options that come with an elbow and length of trunking.

This pump is manufactured from high temperature plastic, and comes complete with 10m of higher specification hose. It meets EN standards and can handle temperatures up to 110 degrees. Supplied with 10m of ‘no sag’ high-grade braided hose. This unique design also cools PRV discharge so it is safe for use with solvent weld pipework. For installers who are audited or working to EN standards.

Designed for unvented cylinder T&P discharge and steam humidifiers. Having one of the largest discharge rates of 32 litres per minute this pump can handle both high temperatures (up to 100°C) and high flow rates. Manufactured in the UK, this heavy-duty, high temperature tank pump incorporates thermal overload protection and a high level alarm switch.

DiversiTech International stock a range of adaptors to connect the unit to the pump.

The self-sealing adaptor is used to form a connection between the condensate hose and a soil and vent pipe. Drill a 13mm hole (for SVA-3) or a 10mm hole (for SVA-6), insert and twist to seal the connection.

This audible alarm can be wired into all pumps with a high-level alarm switch.

Our reinforced PVC braided hose is suitable for condensate drains and comes packaged in clear shrink wrap for protection and easy storage. The black hose has no light penetration, which prevents build-up of mould growth. Available in clear and black, in 6m and 30m coils.

Applications include air conditioning and refrigeration condensate drains, condensate pumps discharge lines and humidifier overflows. Available in 30m coils.

applications include air conditioning and refrigeration condensate drains, condensate pumps discharge lines and humidifier overflows. Available in 30m coils.